Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1241172 | Spectrochimica Acta Part B: Atomic Spectroscopy | 2008 | 12 Pages |
Abstract
A novel method is described for overcoming plasma-related matrix effects in inductively coupled plasma-atomic emission spectrometry (ICP-AES). The method is based on measurement of the vertically resolved atomic emission of analyte within the plasma and therefore requires the addition of no reagents to the sample solution or to the plasma. Plasma-related matrix effects enhance analyte emission intensity low in the plasma but depress the same emission signal at higher positions. Such bipolar behavior is true for all emission lines and matrices that induce plasma-related interferences. The transition where the enhancement is balanced by the depression (the so-called cross-over point) results in a spatial region with no apparent matrix effects. Although it would be desirable always to perform determinations at this cross-over point, its location varies between analytes and from matrix to matrix, so it would have to be found separately for every analyte and for every sample. Here, a novel approach is developed for the in-situ determination of the location of this cross-over point. It was found that the location of the cross-over point is practically invariant for a particular analyte emission line when the concentration of the matrix was varied. As a result, it is possible to determine in-situ the location of the cross-over point for all analyte emission lines in a sample by means of a simple one-step sample dilution. When the original sample is diluted by a factor of 2 and the diluted sample is analyzed again, the extent of the matrix effect is identical (zero) between the original sample and the diluted sample at one and only one location - the cross-over point. This novel method was verified with several single-element matrices (0.05 M Na, Ca, Ba and La) and some mixed-element matrices (mixtures of Na-Ca, Ca-Ba, and a plant-sample digest). The inaccuracy in emission intensity due to the matrix effect could be as large as â 30% for conventional measurements in the normal analytical zone, but is reduced to within 5% with this new method. The major currently known limitation is that the accuracy of the method is highly sensitive to fluctuations and noise in the vertical emission-intensity profile, so the stability of the ICP system must be controlled to preferably within 1%.
Related Topics
Physical Sciences and Engineering
Chemistry
Analytical Chemistry
Authors
George C.-Y. Chan, Gary M. Hieftje,