| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1244098 | Talanta | 2015 | 6 Pages |
•The cork SPME fiber was applied to the determination of organochlorine pesticides in water.•The method is rapid, sensitive and precise for organochlorine pesticides analyses.•The LOQs for organochlorine pesticides ranged from 1.0 to 10.0 ng L−1.•The efficiency of cork fiber was very similar to commercially available fibers.
A novel method for the determination of organochlorine pesticides in water samples with extraction using cork fiber and analysis by gas chromatography with electron capture detector was developed. Also, the procedure to extract these pesticides with DVB/Car/PDMS fiber was optimized. The optimization of the variables involved in the extraction of organochlorine pesticides using the aforementioned fibers was carried out by multivariate design. The optimum extraction conditions were sample temperature 75 °C, extraction time 60 min and sodium chloride concentration 10% for the cork fiber and sample temperature 50 °C and extraction time 60 min (without salt) for the DVB/Car/PDMS fiber. The quantification limits for the two fibers varied between 1.0 and 10.0 ng L−1. The linear correlation coefficients were >0.98 for both fibers. The method applied with the use of the cork fiber provided recovery values between 60.3 and 112.7 and RSD≤25.5 (n=3). The extraction efficiency values for the cork and DVB/Car/PDMS fibers were similar. The results show that cork is a promising alternative as a coating for SPME.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide
