| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1246747 | Talanta | 2009 | 9 Pages |
Poly(vinylchloride) (PVC) based membranes of macrocycles 2,3,4:9,10,11-dipyridine-1,3,5,8,10,12-hexaazacyclotetradeca-2,9-diene (L1) and 2,3,4:9,10,11-dipyridine-1,5,8,12-tetramethylacrylate-1,3,5,8,10,12-hexaazacyclotetradeca-2,9-diene (L2) with NaTPB and KTpClPB as anion excluders and dibutylphthalate (DBP), benzyl acetate (BA), dioctylphthalate (DOP), o-nitrophenyloctyl ether (o-NPOE) and tri-n-butylphosphate (TBP) as plasticizing solvent mediators were prepared and investigated as Co2+ selective electrodes. The best performance was observed with the membranes having the composition L2:PVC:TBP:NaTPB in the ratio of 6:39:53:2 (w/w; mg). The performance of the membrane based on L2 was compared with polymeric membrane electrode (PME) and coated graphite electrode (CGE). The PME exhibits detection limit of 4.7 × 10−8 M with a Nernstian slope of 29.7 mV decade−1 of activity between pH 2.5 and 8.5 whereas CGE exhibits the detection limit of 6.8 × 10−9 M with a Nernstian slope of 29.5 mV decade−1 of activity between pH 2.0 and 9.0. The response time for PME and CGE was found to be 11 and 8 s, respectively. The CGE has been found to work satisfactorily in partially non-aqueous media up to 35% (v/v) content of methanol, ethanol and 25% (v/v) content of acetonitrile and could be used for a period of 4 months. The CGE was successfully applied for the determination of Co2+ in real and pharmaceutical samples and as an indicator electrode in potentiometric titration of cobalt ion.
