Article ID Journal Published Year Pages File Type
1249973 Vibrational Spectroscopy 2014 7 Pages PDF
Abstract

This paper describes a study of a cerium–5 wt.% lanthanum (Ce–5 wt.% La) alloy using Raman spectroscopy and X-ray diffraction (XRD). Examination of the alloy microstructure by optical microscopy and Raman spectroscopy revealed the presence of inclusions which were identified as cerium oxide (CeO2). The study also highlighted the need to avoid excessive laser power during acquisition of the Raman spectra as this appeared to cause the oxidation of the region being analysed where previously no cerium oxide peak had been detected. The propensity of cerium to oxidise in air results in the formation of a CeO2 layer on the surface of the alloy. Raman spectroscopy of the oxide layer formed on the alloy after exposure to air for 21 days found that the Raman peak denoting cerium oxide was seen at between 5 and 7 cm−1 lower than the value for CeO2 (465 cm−1). This is attributed to a combination of a sub-stoichiometric oxide layer and the presence of La in the alloy.

Related Topics
Physical Sciences and Engineering Chemistry Analytical Chemistry
Authors
, ,