| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1264036 | Organic Electronics | 2012 | 7 Pages |
The main goal of the paper was investigation of influence of aluminum electrode preparation via thermal evaporation (TE) and the magnetron sputtering (MS) on power conversion efficiency (PCE) of polymeric solar cells. The photovoltaic properties of such three kinds devices based on poly(3-hexylthiophene-2,5-diyl) (P3HT) as ITO/P3HT/Al, ITO/P3HT:PCBM (1:1, w/w)/Al and ITO/PEDOT:PSS/P3HT:PCBM (1:1, w/w)/Al were investigated. For the constructed devices impedance spectroscopy were analyzed. For devices lack of PEDOT:PSS layer or lack of PCBM, photovoltaic parameters were very low and similar to the parameters obtained for device with Al electrode prepared by magnetron sputtering. The devices comprising PEDOT:PSS with P3HT:PCBM showed the best photovoltaic parameters such as a VOC of 0.60 V, JSC of 4.61 mA/cm2, FF of 0.21, and PCE of 5.7 × 10−1%.
Graphical abstractOrganic electronicsFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► We constructed three kinds of devices. ► We analyse photovoltaic properties in the level of Al electrode preparation. ► We examine devices with various architectures. ► The J–U effects depend on construction devices.
