| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1264592 | Organic Electronics | 2012 | 7 Pages |
We have demonstrated a simple fabrication method for an out-coupling structure to enhance light extraction from organic light-emitting diodes (OLEDs). Spin-coating of SiO2 and TiOx sol mixture solution develops corrugated film. The structural evolution of the corrugation was explained by the localization of surface tension during the solvent evaporation. The structural parameters of the corrugated structure were characterized by varying the spin-coating speed and the mixing ratio of the solution. Compared to conventional devices, OLEDs with a corrugated structure at the backside of the glass substrate showed increased external quantum efficiency without change in the electroluminescence spectrum. The light extraction enhancement is attributed to the decreased incidence angle at the interface of glass substrate and air.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► A corrugated structure was fabricated by a spin-coating process with a mixture of SiO2 and TiOx sol solution. ► Structural parameters of the corrugation were controlled and characterized. ► Light extraction from OLEDs was enhanced with the introduction of the corrugated structure.
