| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1266779 | Ultrasonics Sonochemistry | 2013 | 9 Pages |
A comprehensive algorithm was recently proposed for calculation of the sonochemical effectiveness factor and wastewater treatment modeling. The presented approach implies that ultrasound is an auxiliary source of free radicals in Fenton type reactions; introduction of ultrasound represents an enhancement of pollutant degradation rates. The sonochemical effectiveness factor was introduced in kinetic models as the eUS factor (Grčić et al., 2012 [1]). As a substantial follow-up, this study presents novel considerations. The eUS factor was modeled as a function of employed frequency, actual cavitation-related power intensity of ultrasound and a portion of the cavitationally active zone, i.e. dimensionless active volume. The effect of temperature was disregarded in the present model considerations. Cavitationally active zone in reactors was determined based on the erosion of aluminum foil, resulting in cone-shaped space arising from transducer.In the present study, sonochemical treatment of industrial wastewater containing HCOONa as organic pollutant was performed using different equipment: ultrasonic baths (UB1, UB2 and UB3), cylindrical reactor with homogenizer (HCR) and three-frequency hexagonal cell, i.e. ultrasonic pilot reactor prototype (PP). Explored frequency range was from 20 to 120 kHz. Homogeneous and heterogeneous Fenton-type sonochemical processes, US/Fe(II)(FeSO4,aq.)/H2O2 and US/Fe(II)(steel-plate)/H2O2, respectively, applied to industrial wastewater were investigated in terms of mineralization kinetics. Newly modeled eUS factor was introduced in corresponding kinetic models and the overall model was validated. Kinetic parameters of Fenton process were treated as independent of ultrasound, since eUS factor consists of cavitation-related phenomena responsible for the mineralization rate enhancement. In average, a 21% increase of mineralization efficiency was achieved using a single frequency, while more than 70% increase can be achieved by combining 20, 68 and 120 kHz in PP.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► A viable technique based on material erosion for determination of the cavitationally active zone is presented. ► Developed empirical expression for sonochemical effectiveness factor up to 120 kHz. ► Factor eUS as a part of kinetic models for homogeneous and heterogeneous sono-Fenton processes. ► Research on industrial wastewater sample (EDC/VCM production plant).
