Performance of ITO-free inverted organic bulk heterojunction photodetectors: Comparison with standard device architecture

•We have fabricated and characterized inverted ITO-free organic photodetectors.•Inverted OPDs show better responsivity than standard devices.•Inverted OPDs show similar bandwidths compared to standard ones.

We report on the fabrication of Indium Tin Oxide (ITO)-free inverted organic bulk heterojunction (BHJ) photodetectors of poly(3-hexylthiophene) (P3HT): 1-(3-methoxycarbonyl)-propyl-1-1-phenyl-(6,6) C61 (PCBM). The final inverted device structure is Cr/Al/Cr/P3HT:PCBM/poly-3,4-ethylenedioxythiophene:poly-styrenesulfonate (PEDOT:PSS)/Ag (Zimmermann et al., 2009) [1]. The device is top-absorbing with the light entering through the hole contact grid. We have fabricated standard devices with structure ITO/PEDOT:PSS/P3HT:PCBM/LiF/Al in order to carry out a comparison study. Inverted photodetectors show slightly higher quantum efficiency and responsivity compared to standard devices. Frequency responses at different bias voltages were measured showing a maximum −3 dB cut-off frequency of 780 kHz and 700 kHz at −3 V for the standard and inverted structures respectively. Parameters extracted from the fit of a circuital model to the impedance spectroscopy measurements were used to estimate the photodiode cut-off frequency as function of bias.