CVD synthesis of nitrogen doped carbon nanotubes using ferrocene/aniline mixtures

Nitrogen doped carbon nanotubes (N-CNTs) have been synthesized by the chemical vapour deposition (CVD) floating catalyst method using either 4-ferrocenylaniline or mixtures of varying concentrations of ferrocene/aniline together with toluene as added carbon source. The N-CNTs produced are less stable (thermal gravimetric analysis measurements), less graphitic and more disordered (transmission electron microscope measurements) than their undoped counterparts. The ratio of the Raman D- and G-band intensities increase with the nitrogen concentration used during the CNT growth. Furthermore, the transmission electron microscope (TEM) studies reveal that the CNTs are multi-walled (MW), and that the diameters of the N-MWCNTs can be controlled by systematically varying the concentrations of the nitrogen source. The TEM analysis also revealed that when ferrocenylaniline and ferrocene/aniline reactions are compared at similar Fe/N ratios, higher N doping levels are achieved (ca. 2–5×) when ferrocenylaniline is the catalyst.

Graphical abstractNitrogen doped carbon nanotubes have been synthesized by the chemical vapour deposition floating catalyst method using either 4-ferrocenylaniline or mixtures of varying concentrations of ferrocene/aniline together with toluene as added carbon source.Figure optionsDownload full-size imageDownload as PowerPoint slide