Study on ternary low density polyethylene/linear low density polyethylene/thermoplastic starch blend films

•Compatibilized LDPE/LLDPE/thermoplastic starch blend films are studied.•Starch has more pronounced effect on crystallization of LLDPE than LDPE.•Mechanical properties of LDPE/LLDPE films decrease as starch content increases.•Dynamic properties of LDPE/LLDPE films increase with increase in starch content.

In this work, low-density polyethylene/linear low-density polyethylene/thermoplastic starch (LDPE/LLDPE/TPS) films are prepared with the aim of obtaining environmentally friendly materials containing high TPS content with required packaging properties. Blending of LDPE/LLDPE (70/30 wt/wt) with 5–20 wt% of TPS and 3 wt% of PE-grafted maleic anhydride (PE-g-MA) is performed in a twin-screw extruder, followed by the blowing process. Differential scanning calorimetric results indicate starch has more pronounced effect on crystallization of LLDPE than LDPE. Scanning electron micrograph shows a fairly good dispersion of TPS in PE matrices. Fourier transfer infrared spectra confirm compatibility between polymers using PE-g-MA as the compatibilizer. Storage modulus, loss modulus and complex viscosity increase with incorporation of starch. Tensile strength and elongation-at-break decrease from 18 to 10.5 MPa and 340 to 200%, respectively when TPS increases from 5 to 20%. However, the required mechanical properties for packaging applications are attained when 15 wt% starch is added, as specified in ASTM D4635. Finally 12% increase in water uptake is achieved with inclusion of 15 wt% starch.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide