Synthesis and properties of novel aromatic poly(ester-imide)s bearing 1,5-bis(benzoyloxy)naphthalene units

Two series of new aromatic poly(ester-imide)s were prepared from 1,5-bis(4-aminobenzoyloxy)naphthalene (p-1) and 1,5-bis(3-aminobenzoyloxy)naphthalene (m-1), respectively, with six commercially available aromatic tetracarboxylic dianhydrides via a conventional two-stage synthesis that included ring-opening polyaddition to give poly(amic acid)s followed by chemical imidization to polyimides. The intermediate poly(amic acid)s obtained in the first stage had inherent viscosities of 0.41–0.84 and 0.66–1.37 dl/g, respectively. All the para-series and most of the meta-series poly(ester-imide)s were semicrystalline and showed less solubility. Two of the meta-series poly(ester-imide)s derived from less rigid dianhydrides were amorphous and readily soluble in polar aprotic solvents, and they could be solution-cast into transparent and tough films with good mechanical properties. The meta-series polymers derived from rigid dianhydrides were generally semicrystalline and showed less solubility. Except for one example, the meta-series poly(ester-imide)s displayed discernible Tgs in the range 239–273 °C by DSC. All of these two series poly(ester-imide)s did not show significant decomposition below 450 °C in nitrogen or in air.