| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1419460 | Carbon | 2007 | 11 Pages |
This paper deals with the optimisation of the single walled carbon nanotube (SWCNT) synthesis by the electric arc technique using so-called heterogeneous anodes filled with Ni and Y catalysts along with either graphite (large-grain or small-grain) or diamond powders. The various carbon nanophases produced were analyzed using high-resolution transmission electron microscopy. Plasma physical properties were determined by emission spectroscopy and were correlated to the variation in the carbon products formed. Using large-grain (100 μm) graphite powder corresponded to standard conditions since able to generate impurity-rich SWCNT material resembling that usually described in literature. However, replacing the large-grain graphite powder by small-grain graphite powder (∼1 μm) resulted in a dramatic increase in both the yield and purity of the SWCNTs obtained. On the other hand, a similar result was obtained by using diamond powder (grain size ∼1 μm) instead of the small-grain graphite powder. The results are explained via the erosion modes of the anodes with respect to the apparent density of the powder mixtures filling their cavities. Maintaining a steady plasma composition and a CI/NiI concentration ratio higher than 108 are identified as two conditions required for optimising SWCNT synthesis.
