Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1429082 | Materials Science and Engineering: C | 2013 | 6 Pages |
A novel biodegradable polymer–ceramic nanocomposite which consisted of gelatin (Gel), chitosan (CS), and calcium phosphate (CaP) nanoparticles was prepared based on in situ preparation method. The fabricated biocomposites were characterized by FTIR, X-ray diffraction (XRD), transmission electron microscopy (TEM) as well as scanning electron microscope with X-ray elemental analysis (SEM-EDX). The characterization results confirmed that the crystalline calcium phosphate nanoparticles were mineralized in polymeric matrix and the interaction between Ca2+ in calcium phosphate and functional groups in polymers molecular chains was formed. XRD result showed that in addition to hydroxyapatite (HA), Brushite (BR) and tricalcium phosphate (β-TCP) particles also were formed due to lack of complete penetration of the basic solution into the polymeric matrix. However, SEM image indicated that the polymeric matrix has the controlling role in the particle size of calcium phosphate. The size of particles in three component composites was about 100 nm while in two component composites proved to be more in μm size. TEM observation supported SEM results and showed that the three component composites have calcium phosphate nanoparticles. The elastic modulus and compressive strength of the composites were also improved by the employment of gelatin and chitosan together, which can make them more beneficial for surgical applications.
► A new type of calcium phosphate nanocomposites consisted chitosan and gelatin as polymeric matrix was obtained via in situ precipitation method. ► The formed particles into the polymeric matrix are hydroxyapatite, Brushite and β-tricalcium phosphate. ► The polymer concentration is a predominant factor for inhibiting nucleation and growth of calcium phosphate particles as the particles size was also decreased by increasing the amount of polymeric phase. ► The nano particles formed in three component composites and micro particles formed in two component composites.