| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 143957 | Advanced Powder Technology | 2016 | 6 Pages |
•Ultra-fine fly ash was used as the main powder filler in the gas seal coating.•Seal coating for the wall of underground coal mine was with good air tightness.•Seal coating could ensure safe gas-sealing in underground coal mines.•The mechanical property of the material is up to standard of GB/T23445-2009.
To meet the particular safety requirements for underground coal mining, this paper proposes is going to investigate the capability of ultra-fine fly ash (UFA) with styrene-acrylic emulsion to improve safety for underground mine workers. After studying on the influence of different percentages of UFA on the comprehensive property of seal coating, the optimal amount of UFA is determined as 60%. The water absorption of the seal coating after 7 d is 5.0%. Its original tensile strength is 3.09 MPa. The elongation at break is 80%, and the bonding strength is 0.72 MPa (7 d) and 1.08 MPa (14 d), up to the level II standard of GB/T23445-2009 polymer cement water proof coating. The flame retardant property and antistatic property is up to the safety standard for gas-sealing materials of underground coal mine of MT113-1995. Scanning electron microscopy and air tightness tests show that this material has a compact pore structure with good air tightness, and can be used as gas seal coating for underground coal mine.
Graphical abstractUltra-fine fly ash was used as the main powder filler in the gas seal coating. This coating was with good air tightness for its compact interior structure. Its mechanical property is up to standard of GB/T23445-2009, and its safety standard is up to MT113-1995.Figure optionsDownload full-size imageDownload as PowerPoint slide
