Article ID Journal Published Year Pages File Type
1448573 Acta Materialia 2010 12 Pages PDF
Abstract

Metal flow and microstructure evolution during the thermomechanical processing of thin-gage foil of a near-gamma titanium aluminide alloy, Ti–45.5Al–2Cr–2Nb, with an equiaxed-gamma microstructure was investigated experimentally and theoretically. Foils of thickness of 200–250 μm were fabricated via hot rolling of sheet in a can of proprietary design. The variation in gage of the rolled foils was ±15 μm except in very sporadic (local) areas, with variations of approximately 60 μm relative to the mean. Metallography revealed that the larger thickness variations were associated with large remnant colonies lying in a hard orientation for deformation. To rationalize these observations, a self-consistent model was used to estimate the strain partitioning between the softer (equiaxed-gamma) matrix and the remnant colonies. Furthermore, the efficacy of pre- or post-rolling heat treatment in eliminating remnant colonies was demonstrated and quantified using a static-spheroidization model. The elimination of remnant colonies via spheroidization prior to foil rolling gave rise to improved gage control.

Related Topics
Physical Sciences and Engineering Materials Science Ceramics and Composites
Authors
, , ,