| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1449444 | Acta Materialia | 2007 | 9 Pages |
As-received and shock-prestrained 1018 steel specimens were subjected to forced shear experiments in a split-Hopkinson pressure bar (SHPB) at room temperature and a strain rate of 3800 s−1 to determine the influence of shock-prestraining on the shear behavior of ferrite. Shock-loading was performed below (12.5 GPa) and above (14 GPa) the pressure-induced epsilon phase transition occurring at 13 GPa. Using electron microscopy and electron backscatter diffraction, twinning and microbanding were observed only in the shock-prestrained specimens. Quasi-static compression tests showed an increase in yield and compressive strengths with increased peak shock stress. SHPB tests produced shear localization in all specimens, with shear banding occurring only in the shock-prestrained specimens. Transmission electron microscopy revealed that, at the shear band edge, elongated cells dominate the microstructure, with more shock-induced twins remaining intact in the 12.5 GPa specimen than in the 14 GPa specimen.
