Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1455240 | Cement and Concrete Composites | 2009 | 6 Pages |
The tensile creep and free shrinkage deformations of ultra-high performance concrete (UHPC) were examined through short-term testing to assess the influences of stress/strength ratio, steel fiber reinforcement, and thermal treatment. The use of fibers and the application of thermal treatment decreased 14-day drying shrinkage by more than 57% and by 82%, respectively. Increasing the stress-to-strength ratio from 40% to 60% increased the tensile creep coefficient by 44% and the specific creep by 11%, at 14 days of loading. Incorporating short steel fibers at 2% by volume decreased the tensile creep coefficient by 10% and the specific creep by 40%, at 14 days. Also, subjecting UHPC to a 48-h thermal treatment at 90 °C, after initial curing, decreased its tensile creep coefficient by 73% and the specific creep by 77% at 7 days, as compared to ordinarily cured companion mixes. Comparison of tensile creep behavior to published reports on compressive creep in UHPC reveal that these phenomena differ fundamentally and that further evaluation is necessary to better understand the underlying mechanisms of tensile creep in UHPC. Results from this study also showed that the effects of both thermal treatment and fiber reinforcement were more pronounced in tensile creep behavior than tensile strength results of different UHPC mixes. This emphasizes the importance of conducting tensile creep testing to predict long-term tensile performance.