Microstructure and flexural properties of multilayered fiber-reinforced oxide composites fabricated by a novel lamination route

All-oxide ceramic matrix composites produced by a novel route based on the lamination of thermoplastic prepregs are investigated. This route allows for the production of composites with very homogeneous microstructures and a reduced amount of matrix cracks. NextelTM 610 alumina woven fabric is used here to reinforce a porous oxide matrix composed of 80 vol% Al2O3 and 20 vol% ZrO2. The mechanical behavior of composites submitted to different heat treatments is investigated under 4-point bending and short beam shear. Results show that composites with low interlaminar shear strength present a graceful failure under 4-point bending, characterized by a stepwise stress reduction upon straining beyond the peak stress. The fracture of such composites is accompanied by a series of interfacial delamination events, which enhance energy dissipation during failure. An increase of the interlaminar shear strength due to matrix densification causes a loss of the stepped stress–strain behavior. Nevertheless, fiber-related toughening mechanisms such as crack deflection and bridging still ensure inelastic deformation up to failure of these composites.