Preparation and properties of porous ceramic aggregates using electrical insulators waste

In this paper, porous ceramic aggregates were prepared by electrical insulators waste (EIW). Effects of sintering temperature and content of EIW on the aggregates’ properties such as bulk density, and apparent porosity, total porosity, and cold crushing strength were investigated. With increasing sintering temperature and content of EIW, bulk density and cold crushing strength of the aggregates increased, apparent porosity and total porosity decreased. Based on these results, total porosity of specimens in group B sintered at 1200 °C is 62.0%, cold crushing strength is 35.3 N, and thermal conductivity is 0.165 W/(m K) at 300 °C. Comprehensive properties of specimens can be optimized by adjusting sintering temperature. Meanwhile, strength variation resulted from the combined effects of phase transformation and matrix densification under different sintering temperatures.