Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1463647 | Ceramics International | 2009 | 5 Pages |
Sintering behavior of nanocrystalline zinc oxide (ZnO) powder compacts using hot pressing method was investigated. The sintering conditions (temperature and total time) and results (density and grain size) of two-step sintering (TSS), conventional sintering (CS) and hot pressing (HP) methods were compared. The HP technique versus CS was shown to be a superior method to obtain higher final density (99%), lower sintering temperature, shorter total sintering time and rather fine grain size. The maximum density achieved via HP, TSS and CS methods were 99%, 98.3% and 97%, respectively. The final grain size of samples obtained by HP was greater than that of TSS method. However, the ultra-prolonged sintering total time and the lower final density (88 ks and 98.3%) are the drawbacks of TSS in comparison with the faster HP (17 ks and 99%) method.