Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1465248 | Ceramics International | 2009 | 5 Pages |
Piezoelectric Bi0.5(Na0.82K0.18)0.5TiO3 thick films were prepared by aqueous gel-tape casting. Bi0.5(Na0.82K0.18)0.5TiO3 nano-powder with perovskite structure prepared by sol–gel process was obtained. The average particle size was 200 nm. A stable Bi0.5(Na0.82K0.18)0.5TiO3 suspension with 46 vol% solid loading and <1 Pa s viscosity was prepared when 0.8 wt% of ammonium polyacrylate was added with the pH value controlled in the range 7–9. The plasticizer glycerol had a positive effect on the fluidity of the suspensions. The tensile strength and strain to failure of the green tape were 0.42 MPa and 0.04 mm/mm when the addition of glycerol was 50 wt% of the premix solvent. The resulting about 100 μm thick films had relative permittivity of 910, dielectric loss of 4.9% at 10 kHz, remanent polarization of 24 μC/cm2, coercive field of 56 kV/cm, and longitudinal effective piezoelectric coefficient d33eff of 102 pC/N. The good performance illustrated that gel-tape casting was the effective way to prepare Bi0.5(Na0.82K0.18)0.5TiO3 thick film.