Article ID Journal Published Year Pages File Type
1465848 Composites Part A: Applied Science and Manufacturing 2015 9 Pages PDF
Abstract

Late-stage fatigue damage of an E-glass/epoxy 3D orthogonal non-crimp textile composite loaded in the warp direction has been investigated using a combination of mechanical testing, X-ray micro computed tomography (μCT), optical microscopy and finite element modelling. Stiffness reduction and energy dissipated per cycle were found to be complementary measurements of damage accumulation, occurring in three stages: a first stage characterised by rapid changes, a more quiescent second stage, followed by a third stage where the (decreasing) stiffness and (increasing) energy dissipation change irregularly and then rapidly, to failure. Microscopy of specimens cycled into the transition between the second and third stages showed macroscopic accumulations of fibre fractures in sections of warp tows which lying adjacent to the surface weft tows which are crowned-over by the Z-tows. At these locations, the warp tow fibres are subjected to stress concentrations both from transverse weft tow matrix cracks and resin pocket cracks.

Related Topics
Physical Sciences and Engineering Materials Science Ceramics and Composites
Authors
, , , , , , , , , ,