Influence of plastic deformation on single-fiber push-out tests of carbon fiber reinforced epoxy resin

In our study we present a procedure to measure and analyze single-fiber push-out force–displacement curves on carbon fiber reinforced polymers using a cyclic loading–unloading scheme. The measured cyclic force–displacement curves allow an energy-based evaluation of the interfacial failure, taking into account elastic, plastic and other dissipative energy contributions. Experimental and modeling results demonstrate that a deviation of the push-out curve from linear behavior does not correspond to crack opening but to a plastic deformation of the matrix. Evaluating the plastic energy yields a linear increase of the total plastic energy after a certain indenter displacement. This linear increase is attributed to stable crack propagation. Back-extrapolation of the linear part to zero total plastic energy using a linear regression yields the initiation of crack growth. It is concluded that for ductile matrix materials like polymers, a reliable interpretation of push-out data has to take into account plastic material deformation.