| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1465905 | Composites Part A: Applied Science and Manufacturing | 2015 | 10 Pages |
Poly(ethylene-co-methacrylic acid) (EMAA) as a thermally activated healing agent in a high performance, high temperature tetra-glycidyl methylene dianiline (TGDDM)/diethyl toluene diamine (DETDA) mendable epoxy composite is reported for the first time. Despite curing above EMAAs melting point (Tm = 85 °C), healing occurred by incorporating a preliminary low temperature curing step of 5 h at 80 °C, prior to cure at 177 °C. Healing occurred via the pressure delivery mechanism derived from tertiary amine catalysed surface condensation reactions between EMAA and hydroxyl groups from the epoxy resin. Healing efficiencies of 36%, 55% and 105% were achieved after heating at 150 °C, 200 °C and 230 °C respectively, but decreased rapidly with continued healing. Healing at 150 °C and 200 °C revealed significant healing despite remaining in the glassy state. In addition, EMAA enhanced mode I interlaminar fracture toughness by more than 270% for both the DETDA and 4,4-DDS networks.
