A study of the mechanical behaviour on fibre reinforced hollow microspheres hybrid composites

This paper presents the results of an investigation into the effects of hollow glass microsphere fillers and of the addition of short fibre reinforcements on the mechanical behaviour of epoxy binding matrix composites. Properties like flexural stiffness, compressive strength, fracture toughness and absorbed impact energy, were studied. The specimens were cut from plates produced by vacuum resin transfer moulding having a microsphere contents of up to 50% and with fibre reinforcement up to 1.2% by volume. The tests performed with unreinforced composites show that flexural and compressive stiffness, maximum compressive stresses, fracture toughness and impact absorbed energy decrease significantly with increasing filler content. However, in terms of specific values, both flexural and compressive stiffness and impact absorbed energy increase with microsphere content. The addition of glass fibre produces only a slight improvement in the flexure stiffness and fracture toughness, while increasing significantly the absorbed impact energy. In contrast, the addition of a small percentage of carbon fibres produces an important improvement in both fracture toughness and flexure stiffness, when hybrid composites with 0.9% carbon fibre are compared to unreinforced foam, but did not improved absorbed impact energy.