| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1466955 | Composites Part A: Applied Science and Manufacturing | 2010 | 6 Pages |
The influence of chemical and solvent extraction compatibilising techniques on the mechanical properties of poly-lactic acid (PLA) and MaterBi®-polyester (PEM) based bio-composites are compared. First, fibres were chemically grafted with two fatty chains: stearic anhydride and octadecylisocyanate. Grafted fibres were characterised by FTIR and elemental analyses. Contact angle measurements show the hydrophobisation of the fibres in spite of very low surface grafting. Extracted and non-grafted fibres were prepared to be used as references. PEM and PLA-based composites with 30% w/w were prepared by compression moulding. Their mechanical properties were studied. It was found that chemical and solvent treatment of the fibres improved the reinforcement effect in the case of a PEM matrix and the Young modulus increased by 96%. An important conclusion is that solvent extraction is as efficient as chemical grafting for compatibilisation treatment. These results open new perspectives to prepare industrially efficient bio-composite.
