Optimising industrial hemp fibre for composites

The optimisation of New Zealand grown hemp fibre for inclusion in composites has been investigated. The optimum growing period was found to be 114 days, producing fibres with an average tensile strength of 857 MPa and a Young’s modulus of 58 GPa. An alkali treatment with 10 wt% NaOH solution at a maximum processing temperature of 160 °C with a hold time of 45 min was found to produce strong fibres with a low lignin content and good fibre separation. Although a good fit with the Weibull distribution function was obtained for single fibre strength, this did not allow for accurate scaling to strengths at different lengths. Alkali treated fibres, polypropylene and a maleated polypropylene (MAPP) coupling agent were compounded in a twin-screw extruder, and injection moulded into composite tensile test specimens. The strongest composite consisted of polypropylene with 40 wt% fibre and 3 wt% MAPP, and had a tensile strength of 47.2 MPa, and a Young’s modulus of 4.88 GPa.