Article ID Journal Published Year Pages File Type
1473885 Journal of the European Ceramic Society 2014 14 Pages PDF
Abstract

Low-cost porous mullite ceramic membrane supports were fabricated from recycling coal fly ash with addition of natural bauxite. V2O5 and AlF3 were used as additives to cause the growth of mullite crystals with various morphologies via an in situ reaction sintering. Dynamic sintering, microstructure and phase evolution of the membrane supports were characterized in detail and open porosity, pore size, gas permeation and mechanical properties were determined. It showed the membrane support with 3 wt.% V2O5 and 4 wt.% AlF3 addition exhibits an open porosity of ∼50%, mechanical strength of 69.8 ± 7.2 MPa, an interlocking microstructure composed of anisotropically grown mullite whiskers with an aspect ratio of 18.2 ± 3.6 at 1300 °C. Addition of more V2O5 lowered the secondary mullitization temperature, resulting in more mullite formation at lower temperatures. The fabricated membrane supports feature high porosity without mechanical strength degradation, possible strengthening mechanism of the mullite whiskers was further discussed.

Related Topics
Physical Sciences and Engineering Materials Science Ceramics and Composites
Authors
, , , , ,