| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1478385 | Journal of the European Ceramic Society | 2006 | 4 Pages |
Abstract
Fabrication process for three-dimensional ceramic photonic crystals with a diamond structure was investigated. A diamond structure composed of epoxy lattice including SiO2–TiO2 ceramic particles at 10 vol.% was fabricated as a precursor by stereolithography. After burning off the epoxy resin in air, the diamond structure of SiO2–TiO2 was successfully sintered at 1400 °C for 2.5 h. The linear shrinkage ratio was 50%. Cracks were not found in the sintered diamond structure. Photonic bandgap was observed at around 19 GHz.
Related Topics
Physical Sciences and Engineering
Materials Science
Ceramics and Composites
Authors
Hiromi Mori, Soshu Kirihara, Yoshinari Miyamoto,