Fabrication technologies for oxide–oxide ceramic matrix composites based on electrophoretic deposition

Electrophoretic deposition (EPD) was used to fabricate alumina matrix composites with high volume fraction of woven fibre mat (Nextel™ 720) reinforcement in a multilayer structure. Colloidal suspensions of Al2O3 nanoparticles in ethanol medium with addition of 4-hydrobezoic acid were used for EPD. Two different techniques were developed for fabrication of Al2O3 matrix/Nextel™ 720 fibre composites. The first method is a combination of standard EPD of single fibre mats with a subsequent lamination procedure to fabricate the multilayered composite. The second method involves the simultaneous infiltration of several (three or more) Nextel™ 720 fibre mats by EPD in a tailor-made cell. The composites exhibit a homogeneous matrix microstructure, characterised by a very high particle packing density and relatively low porosity after sintering at 1300 °C. The EPD cell allows production of relatively large bodies (10 cm diameter). By combination of the multilayer EPD infiltration and lamination processes developed here, thick ceramic matrix composite components (>10 mm thickness) can be fabricated, which opens the possibility of greater industrial application of the materials.