Article ID Journal Published Year Pages File Type
1478713 Journal of the European Ceramic Society 2006 6 Pages PDF
Abstract

In this paper, the tribological behaviors of Ni–Cr alloy sliding against Si3N4 and WC–Co at 20 °C and 600 °C were investigated on a tribometer with a ball-on-disk configuration. The experimental results indicated that Ni–Cr alloy sliding against WC–Co exhibited higher wear resistance than that sliding against Si3N4. From the viewpoints of the interfacial interactions between metal and ceramic (chemical reaction, wetting, adhesion, transference), the wear mechanisms were elucidated. The tribological behaviors of Ni–Cr alloy/ceramic tribo-couples were well correlated with the interfacial characteristics, namely the reactive interface and the non-reactive interface. Ni–Cr alloy/Si3N4 tribo-couple showed severe adhesive wear as a result of the interfacial reaction between Ni and Si3N4, while the non-reactivity of Ni/WC interface is the most important factor corresponding to the moderate adhesive wear in Ni–Cr alloy sliding against WC–Co. Finally, the relations among the interfacial characteristics, wear behavior, and temperature were discussed. The results may provide some experimental evidences on the design and optimization of metal/ceramic tribo-couples.

Related Topics
Physical Sciences and Engineering Materials Science Ceramics and Composites
Authors
, , , ,