| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1489381 | Materials Research Bulletin | 2012 | 7 Pages |
Structural, microstructural, electrical properties and their thermal stability for (1 − x)BF–xBT system where x ranges from 0.20 to 0.35 have been investigated. Its phase diagram shows a morphortropic phase boundary (MPB) with the coexistence of rhombohedral and pseudo-cubic phases for the composition around 0.275 ≤ x ≤ 0.30. The optimized piezoelectric properties with d33 varied from 50 to 136 pC/N and the planar electromechanical coupling factor kp varied from 0.165 to 0.312 over a broad high Curie temperature range from 380 to above 600 °C were obtained. The results indicated that samples with pseudo-cubic phase began to depole far below Curie point, while samples with rhombohedral phase showed good resistance to thermal depoling. A high thermal stability with Td = 460 °C, combining a high d33 value of 116 pC/N, was obtained in (1 − x)BF–xBT ceramics prepared by the conventional ceramic processing technique. The internal bias field in rhombohedral phase would stabilize the remnant polarization and favor the thermal stability.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► A morphortropic phase boundary (MPB) with the coexistence of rhombohedral and pseudo-cubic phases was found. ► Rhombohedral phase showed better resistance to thermal depoling than that of pseudo-cubic phase. ► A high thermal stability with Td = 460 °C, combining a high d33 value of 116 pC/N, was obtained. ► The internal bias field would stabilize the remnant polarization and favor the thermal stability.
