| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1489691 | Materials Research Bulletin | 2012 | 4 Pages |
The purpose of this study was to investigate the antibacterial effect of sand-blasted, large-grit, acid-etched (SLA) treated Ti–Ag alloys. Three different alloys with varying Ag contents (Ti–1Ag, Ti–2Ag, and Ti–4Ag) were SLA treated by grit blasting with 250 μm sized alumina and acid-etching in 7% HCl + 27% H2SO4 solution at 110 °C for 5 min. The microporous structures were formed following SLA treatment and Ag particles were identified on Ti–2Ag and Ti–4Ag alloys. And high concentration of Ag released steadily during 7 days from the Ti–4Ag. Higher level of antibacterial effect was evident on SLA treated Ti–Ag alloys compare to commercially pure Ti (p < 0.05) in the antibacterial test using Streptococcus aureus whereas no significant difference in cell viability among the SLA treated Ti–Ag allows and commercially pure Ti was identified. Hence, it was concluded that SLA treated Ti–Ag had an antibacterial effect while being biocompatible.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► SLA treated Ti–Ag alloy in HCl and H2SO4 mixed solution could make the macro rough surface. ► The high concentration of Ag released steadily during 7 days from the Ti–4Ag. ► SLA treated Ti–Ag alloys had an antibacterial effect as well as being non-cytotoxic.
