| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1494653 | Optical Materials | 2014 | 6 Pages |
•We fabricated double layer Ti/TiO2 films using a combined sputter/sol–gel method.•We obtained porous Ti films with low resistance (∼2.7 Ω/sq.) at substrate temperature of 300 °C.•The efficiency of prepared DSCs sample is 5.73% [ff: 0.76, Voc: 0.71 V, Jsc: 10.61 mA/cm2].
Double layer nanoporous films of Titanium (Ti)/Titanium oxide (TiO2) were fabricated by a combined radio frequency sputtering and sol–gel combustion method and investigated with respect to its photo-anode properties of transparent conductive oxide-less dye-sensitized solar cells (TCO-less DSCs). The porous Ti layer can collect electrons from the TiO2 layer and allows the ionic diffusion of iodide ion/triiodide ion (I-/I3-) through the hole. The porous Ti layer with low sheet resistance (∼2.7 Ω/sq.) can be prepared by substrate temperature 300 °C under RF power 300 W and Ar gas pressure 5 mTorr. The Ti/TiO2 double layers prepared by combined RFS/SGC method show the good impedance characteristics. The efficiency (η) of prepared TCO-less DSCs sample is 5.73% [fill factor (ff): 0.76, open circuit voltage (Voc): 0.71 V, short-circuit current density (Jsc): 10.61 mA/cm2].
Graphical abstractFigure optionsDownload full-size imageDownload high-quality image (286 K)Download as PowerPoint slide
