| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1497929 | Progress in Solid State Chemistry | 2007 | 8 Pages |
We report on the synthesis, optical and electrical properties of thin films of LaxSr(1−x)Ti(O,N)3, x = 0, 0.25, 0.50, 0.75 and 1. The films were grown by a soft chemistry process from polymeric precursor solutions, which were deposited by spin coating on 〈100〉-oriented SrTiO3 substrates. After drying, the organic matrix was burned at 400 °C. These steps were repeated six times to obtain a reasonable thickness of the films. Afterwards, the samples were heated in a tube furnace at 950 °C in flowing ammonia. The oxynitride films showed different colours from red-orange for LaTiO2N to greenish-blue for SrTiO3:N. The films were characterised by X-ray diffraction, scanning electron microscopy, atomic force microscopy, UV–vis spectroscopy, secondary ion mass spectrometry and electrical measurements. The results show that the films are polycrystalline and have the perovskite structure. Their thickness is about 440 nm and the average roughness value is 7.5 nm. UV–vis transmittance measurements showed a strong decrease in the band gap values for the oxynitrides compared to the respective oxides. The values change from approximately 3.2 eV for the oxides to an average value of 2.4 eV for the oxynitrides. The electrical measurements indicate a change in the electrical behaviour from insulator for LaTiO2N to semiconductor for SrTiO3:N.
