Direct Torque Control Based Three Level Inverter-fed Double Star Permanent Magnet Synchronous Machine

In this paper, direct torque control (DTC) algorithms for double star permanent magnet synchronous machine alimented by two inverters is described. The double star permanent magnet synchronous machine has two sets of three-phase stator windings spatially shifted up by an angle γ=300. The double star permanent magnet synchronous is used in areas of high power industrial applications such as traction and naval propulsion. Because constitute an advantageous choice compared to classical synchronous machine, because of the relatively low torque produced. This machine is controlled by tree level direct torque with speed regulator PI, replaced by the sliding mode regulator to improve the results obtained. The implementation of the DTC multi-level applied to a double star permanent magnet synchronous machine is validated with simulated results. In this paper a method for modeling and simulation of double star permanent magnet synchronous motor drive MATLAB/Simulink.