Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1522374 | Materials Chemistry and Physics | 2013 | 11 Pages |
Abstract
10 Induction hardened discs with two initial hardness levels were used for exploring the influences of the variation of initial hardness as well as induction hardening (IH) recipes on the heat treatment distortions and hardening depth. The results show that for the same initial hardness, the larger the energy input, the higher the distortion size as well as the hardening depth. For a given induction hardening recipe, the increase in initial hardness leads to a deeper hardening depth but a smaller distortion. One disc was selected for the residual stress investigation in three orthogonal directions by neutron diffraction (ND). The corresponding stress-free lattice spacing d0 was measured from the same material using both ND and X-ray diffraction (XRD) methods. The ND results show that the variation of d0 in the hardened layer is significant and should be taken into account for stress calculation. However, regarding the core region, the d0 value measured by XRD is more reliable. Accordingly, a combination of the ND-measured d0 profiles in the hardened layer and the XRD-measured d0 value in the core was adopted for the determination of residual stress distributions.
Related Topics
Physical Sciences and Engineering
Materials Science
Electronic, Optical and Magnetic Materials
Authors
J. Yi, M. Gharghouri, P. Bocher, M. Medraj,