Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1523075 | Materials Chemistry and Physics | 2012 | 10 Pages |
Novel poly(phenylene sulphide) (PPS) nanocomposites reinforced with an aminated derivative (PPS-NH2) covalently attached to acid-treated single-walled carbon nanotubes (SWCNTs) were prepared via simple melt-blending technique. Their morphology, viscoelastic behaviour, electrical conductivity, mechanical and tribological properties were investigated. Scanning electron microscopy revealed that the grafting process was effective in uniformly dispersing the SWCNTs within the matrix. The storage and loss moduli as a function of frequency increased with the SWCNT content, tending to a plateau in the low-frequency regime. The electrical conductivity of the nanocomposites was considerably enhanced in the range 0.1–0.5 wt% SWCNTs; electrical and rheological percolation thresholds occurred at similar nanotube concentrations. Mechanical tests demonstrated that with only 1.0 wt% SWCNTs the Young's modulus and tensile strength of the matrix improved by 51 and 37%, respectively, without decrement in toughness, ascribed to a very efficient load transfer. A moderate decrease in the friction coefficient and a 75% reduction in wear rate were found for the abovementioned nanotube loading, indicating that PPS-NH2-g-SWCNTs are good tribological additives for thermoplastic polymers. Based on the promising results obtained in this work, it is expected that these nanofillers will be used to develop high-performance thermoplastic/CNT nanocomposites for structural applications.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► PPS composites incorporating an aminated derivative attached to SWCNTs were prepared. ► Electrical and rheological percolation thresholds occurred at similar SWCNT content. ► A strong improvement in the Young's modulus and tensile strength was obtained. ► A 75% reduction in wear rate was found for 1.0 wt% SWCNT loading.