Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1531626 | Materials Science and Engineering: B | 2007 | 6 Pages |
Abstract
Indium-tin-oxide doped tin films were prepared by magnetron sputtering under various sputtering power of tin target and various post-annealing temperatures. Experimental results show that the carrier concentration of these films increased with the doping of tin, although, the mobility of the carrier decreased. When the sputtering power of tin target is 7.5 W, there is maximum carrier mobility of 32.1 cm2 s Vâ1 and lowest resistivity of 6.92 Ã 10â4 Ω cm. After annealing, an electrical resistivity as low as 2.67 Ã 10â4 Ω cm was obtained. The optical transmittance of films in visible region increased over 90% after annealing. The optical energy band gap increased with the increase of the annealing temperature and the optical band gap is 3.96 eV at 450 °C.
Related Topics
Physical Sciences and Engineering
Materials Science
Electronic, Optical and Magnetic Materials
Authors
Chih-Hao Yang, Shih-Chin Lee, Tien-Chai Lin, Wen-Yan Zhuang,