Article ID Journal Published Year Pages File Type
1538650 Optics Communications 2010 4 Pages PDF
Abstract

We report a higher-order mode filter in highly nonlinear photonic crystal fibers (HNPCFs) made by a conventional fiber taper rig based on controlled hole collapse. The air holes of the HNPCFs will become smaller due to the surface stress when they are heated on the taper rig incorporating a simple burner configuration. So the HNPCFs' configuration parameters can be easily changed by controlling the heating time. As is well known, if the relative hole size d/Λ of PCF is less than or equal to 0.4, it will become an endlessly single mode fiber. So we can control the heating time to satisfy the criterion of endlessly single mode operation, the heated section will be a higher-mode filter in HNPCFs. The optical loss of the higher-order mode filter is very low for the fundamental mode, typically less than 0.1 dB.

Keywords
Related Topics
Physical Sciences and Engineering Materials Science Electronic, Optical and Magnetic Materials
Authors
, , , , ,