Article ID Journal Published Year Pages File Type
1540572 Optics Communications 2008 12 Pages PDF
Abstract
Based on the SFM model [M. San Miguel, Q. Feng, J.V. Moloney, Phys. Rev. A. 52 (1995) 1728.], complete chaotic synchronization characteristics of linear-polarization (LP) Mode of the vertical-cavity surface-emitting semiconductor lasers (VCSELs) with isotropic optical feedback are numerically investigated. When the propagation time τc of light from the transmitter to the receiver equals to the external cavity round-trip time τ, and the central frequency of the T_VCSEL matches that of the R_VCSEL, in large scale region of the feedback coefficient and the injection current where the x-polarization mode as well as the y-polarization mode obtains high synchronization quality at the same time. However, in the central frequency mismatch regions where the x- and y-polarization mode can obtain inferior synchronization quality at same time. But for τc ≠ τ, each LP mode of the mixed polarization modes achieved inferior synchronization quality at the same time. Besides, with big enough injection current, the output of the system with the same central frequency in two lasers is entirely governed by the y-polarization mode when the feedback coefficient and Δτ(=τc − τ) fixed at a certain value. So the system can realize steadily good synchronization of the completely dominant y-polarization mode. But the synchronization quality of the completely dominated y-polarization mode can be deteriorated by increasing absolute frequency detuning value. Besides, in positive frequency mismatch regions where the influence of the same frequency detuning value on the synchronization quality of the entirely governed y-polarization mode becomes smaller than in negative frequency detuning regions. At last, when τ is given and the central frequency of the T_VCSEL matches that of the R_VCSEL, the influence of the τc is not a simple time-shift in the time-evolution of the receiver VCSEL, which has serious influence on the complete synchronization quality of each LP mode.
Related Topics
Physical Sciences and Engineering Materials Science Electronic, Optical and Magnetic Materials
Authors
, , , ,