Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1549228 | Solar Energy | 2016 | 11 Pages |
Abstract
This study presents an innovative new alternative for utilizing phase change materials as energy storage media in solar power towers. The solar power tower prilling or granulation concept combines the existing molten salt design with a prilling tower incorporated into the central receiver. In this way heat transfer limitations normally associated with these systems can be overcome since only very small particles (diameter 1-2Â mm) are utilized. Three design cases were considered and a detailed model of the process was developed. The model demonstrates the design dependence on several key variables including particle diameter and the necessity of considering the system in conjunction with the steam generation cycle. Pinch considerations within this cycle and the tower itself determine the operational feasibility. It was found that the receiver design and prilling feed systems are crucial aspects which must be investigated further to refine the concept design and complete a full techno-economic assessment and optimization. The “best case scenario” resulted in a reduction of the circulating salt flow by one third compared to the base case. Preliminary indications are that this would result in a 20% reduction of the overall plant capital cost, but additional costs such as solids handling and a complex receiver design have to be taken into account.
Related Topics
Physical Sciences and Engineering
Energy
Renewable Energy, Sustainability and the Environment
Authors
Heinrich Badenhorst,