Atomic layer deposition of epitaxial ZrO2 coating on LiMn2O4 nanoparticles for high-rate lithium ion batteries at elevated temperature

•Ultrathin and highly-conformal ZrO2 coatings have been facilely deposited on LiMn2O4 nanoparticles using atomic layer deposition at 120 °C.•Epitaxial growth of ZrO2 from amorphous phase to crystallinity on underlying LiMn2O4 nanoparticles has been observed.•ZrO2 ALD coating contributes to high-rate cycling performance of LiMn2O4 cathode at elevated temperature.

Epitaxial ZrO2 coating on LiMn2O4 nanoparticles using atomic layer deposition (ALD) shows high conformality, uniformity and precise thickness control at atomic scale. The thickness of ZrO2 coating can be precisely tailored at 2 Å per ALD cycle. Cycling performance of ZrO2 ALD-modified LiMn2O4 cathode material is optimized by tuning the coating thickness via varying ALD growth cycles. The optimal thickness of ZrO2 coating for maximized electrochemical performance of LiMn2O4 is ∼1.2 nm grown via 6 ZrO2 ALD layers. LiMn2O4 nanoparticles coated with 6 ZrO2 ALD layers deliver a very high initial discharge capacity of 136.0 mAh/g at 1C at 55 °C, significantly higher than that of bare LiMn2O4 (124.1 mAh/g). The effect of ZrO2 ALD coating on improving capacity retention of LiMn2O4 is even more distinct at high charge/discharge rate at elevated temperature. LiMn2O4 nanoparticles coated with 6 ZrO2 ALD layers after heat treatment retain a discharge capacity of 90.3 mAh/g after 100 cycles at 5C at 55 °C, while bare LiMn2O4 nanoparticles exhibit a final capacity of 58.8 mAh/g. ZrO2-ALD-modified LiMn2O4 nanoparticles show significantly improved specific capacity and enhanced cycleability at high rate at elevated temperature due to the protective effect of ultrathin and high-quality ALD surface coatings.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide