Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1558631 | New Carbon Materials | 2007 | 5 Pages |
Abstract
Solid cylindrical carbon-carbon composites were processed using conventional thermal gradient chemical vapor infiltration. High thermal conductivity (55 W/m·°C) carbon fibers (48 k) were inserted in the center of a cylindrical low thermal conductivity (0.15 W/m·°C) needle punched carbon felt preform, to create a thermal gradient because of the difference in thermal conductivities. The hottest portion (900-1200 °C) was along the inserted carbon fibers, where the pyrolytic reaction of natural gas occurred. The densification radially moved outwards and ultimately a density of 1.778 g/cm3 was obtained after 67 h. The process parameters such as the electric power of the furnace, electrical resistance of the sample, densification time, and the position of the deposition layer were studied. A densified sample having a volume fraction of carbon fibers of 10% was tested for ablation and erosion. The microstructure of the pyrolytic carbon matrix of the as-prepared sample was investigated by polarized light microscopy and scanning electron microscopy.
Related Topics
Physical Sciences and Engineering
Materials Science
Materials Chemistry
Authors
Shameel Farhan, Ke-zhi LI, Ling-jun GUO,