| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 156074 | Chemical Engineering Science | 2011 | 10 Pages |
A plate-type anodic alumina support (γ-Al2O3/Fe–Cr–Ni alloy/γ-Al2O3) was used to prepare a series of Ru catalysts. The performance of these catalysts was investigated in the steam reforming of kerosene (SRK). Ethanol solution impregnation was used to enhance metal dispersion on the catalyst surface. The catalyst prepared by ethanol solution impregnation and dried at 120 °C (Ru/Al2O3-ED) gave a higher metal dispersion and more favorable activity and durability than that prepared in aqueous solution. However, owing to shrinking caused by the oxidation of ruthenium species, high temperature calcination in air after impregnation greatly decreased the metal dispersion on the catalyst surface, regardless of the impregnation solution type. In contrast to calcination in air, high temperature N2 treatment could decompose the reducible ruthenium species on the Ru/Al2O3-ED completely. This indicates that H2 pre-reduction is not an essential procedure for the SRK reactions over this catalyst. The experimental results also confirm this hypothesis. The effect of Ce addition was also investigated and was found to enhance significantly the catalyst tolerance to carbon deposition thereby improving the SRK durability of Ru/Al2O3-ED under a high space velocity. In addition, owing to the high electrical resistance of the Fe–Cr–Ni alloy, the anodic alumina catalyst itself can be used as a heater, when an electrical current is applied along the alloy layer. Under an electrical-heating pattern, the SRK reaction system reached stability within 15 min, offering a strong possibility for shortening the start-up time of conventional reformers from 1 to 2 h to a few minutes.
► Plate-type alumina-supported Ru catalyst for steam reforming of kerosene. ► Enhanced metal dispersion by an ethanol solution impregnation method. ► H2 pre-reduction before SRK is unnecessary over this catalyst. ► Promoted tolerance to carbon deposition by Ce addition. ► An electrical-heating pattern gives a rapid SRK system startup.
