| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1563167 | Computational Materials Science | 2009 | 11 Pages |
A series of uniaxial tensile test under cryogenic temperature was carried out for AISI 304 and 316 austenitic stainless steels (ASS) in this study. Typical non-linear hardening phenomena under the cryogenic environment, such as transformation induced strain hardening and threshold strain for the 2nd hardening, has been observed in a quantitative manner.The important factors affecting the non linear material behavior of austenitic stainless steel including phase transformation, discontinuous yielding and micro-damage are modeled using constitutive equations system based on strain decomposition at the small strain formulation. A strong nonlinearity of strain hardening is described using the coupling of modified Bodner’s plasticity model and phase transformation induced strain model. The strain (threshold strain for onset of 2nd hardening) dependent plasticity model was proposed in the hardening function of Bodner’s model. In order to explicitly express the phase transformation induced strain, TI model (Tomita and Iwamoto model [Y. Tomita, T. Iwamoto, Constitutive modeling of TRIP steel and its application to the improvement of mechanical properties, International Journal of Mechanical Sciences 37 (1995) 1295–1305.]), which is a function of accumulated plastic strain and volume fraction factor of martensite, is selected in this study.Also the unified damage model, which can be connected with elasto-plastic constitutive equation developed in this study, is suggested, and the utility of proposed model was validated by the comparison between experiments and numerical evaluations.
