Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1574359 | Materials Science and Engineering: A | 2015 | 10 Pages |
Abstract
Nanostructured metallic multilayers systems continue to garner interest because of their promising mechanical properties, exploitable in the field of materials engineering. These novel materials show high yield strengths, anomalous Young's modulus values and even superior radiation tolerance for layer thicknesses up to a few tens of nanometers. However, there are still many unknowns related to the deformation mechanisms operating at the nanoscale because of deformation mechanisms, in this nanoscale, depend directly on the layer thickness and the combination of different or similar crystal structures in the interface. The objective of this work is to produce Zr/Nb multilayers and investigate the dependence of deformation mechanisms when the layer thickness is reduced. Nanoindentation hardness as a function of periodicity, λ, has been measured for Zr/Nb multilayers. It has been found that for decreasing h the yield strength values, Ï2.7, do not increase. For λ=60 nm and λ=30 nm, Ï2.7 values are almost constant: 1.97 and 1.93 GPa, respectively, whereas for λ=10 nm, the yield strength shows a decrease to 1.79 GPa. The mismatch between Ï2.7 and ÏCLS values for any core cut-off, α, condition (0.2 and 1) and for any η ratio (η= hZr/hNb), indicates that the strain mechanism based on CLS did not occur for any period studied; therefore, the strain mechanism based on IBS is suggested, in accord with the activation of a pyramidal slip system {112¯2}ã1¯1¯23ã, along Zr layer, even for thickness up to 30 nm. Thereby, dislocation loop glide is not confined to an isolated layer, changing the plastic behaviour of the nano-multilayer.
Related Topics
Physical Sciences and Engineering
Materials Science
Materials Science (General)
Authors
E. Frutos, M. Callisti, M. Karlik, T. Polcar,