Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1576260 | Materials Science and Engineering: A | 2013 | 12 Pages |
Abstract
Samples of commercially pure copper (ETP copper) were subjected to equal-channel angular pressing (ECAP) for up to 16 passes at room temperature following route Bc. Microstructural evolution was determined by oriented image microscopy (OIM) and differential scanning calorimetry (DSC) was used to estimate the stored deformation energy and the recrystallization temperature after each ECAP pass. On the other hand, electrical properties were correlated with the associated energy that results from the defects induced by ECAP. Results show that the stored energy rises on increasing ECAP deformation, while the recrystallization temperature decreases significatively. Also, mechanical properties after each pass were evaluated by tensile tests. Microstructural and mechanical features display that a stable microstructure is attained after four passes. Similarly, electrical conductivity decreases up to a saturation state at increasing ECAP passes.
Keywords
Related Topics
Physical Sciences and Engineering
Materials Science
Materials Science (General)
Authors
O.F. Higuera-Cobos, J.M. Cabrera,