Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1584714 | Materials Science and Engineering: A | 2007 | 9 Pages |
This study investigates composite lead-free solders fabricated by adding between 0.5 and 3 wt% of Ni particles in situ to Sn–3.5 wt%Ag lead-free solder. The single lap shear strength, fracture behavior and microstructural evolution characteristics of the as-reflowed specimens are examined and compared with those of specimens thermally aged at 150 °C for various aging times. In general, it is found that the single lap shear strength of the joints increases with increasing Ni addition in the as-reflowed condition, but decreases with increasing storage time in the aged specimens. For Ni additions of 0.5 and 1 wt%, the specimens fracture in the solder near the intermetallic compound (IMC) layer/solder interface, which suggests that the solder matrix has a lower strength than the IMC layer. The presence of elongated dimple-like structures on the fracture surfaces of these specimens is indicative of a ductile failure mode. For Ni additions of more than 1 wt%, the specimens fracture with brittle characteristics at the solder/IMC interface, which indicates that an increased Ni addition increases the strength of the solder matrix beyond that of the interfacial layer.