Article ID Journal Published Year Pages File Type
1585847 Materials Science and Engineering: A 2006 8 Pages PDF
Abstract

The reactive diffusion between Sn–Ag solders and Cu was experimentally examined during soldering and isothermal annealing. Three sorts of solders with compositions of Sn–3.5Ag, Sn–3.5Ag–0.1Ni and Sn–3.5Ag–0.1Co were used for the experiment. Each solder was soldered on a Cu plate at 523 K (250 °C) for 1–60 s in a pure nitrogen gas, and then the solder/Cu diffusion couple was isothermally annealed at 423 K (150 °C) for 168–1008 h. Due to soldering, only Cu6Sn5 is formed at the interface in each diffusion couple. On the other hand, Cu3Sn is produced between Cu6Sn5 and Cu owing to the isothermal annealing. The composition of Cu6Sn5 is (Cu0.8Ni0.2)6Sn5 and (Cu0.93Ni0.07)6Sn5 on the solder and Cu3Sn sides, respectively, in the (Sn–3.5Ag–0.1Ni)/Cu diffusion couple, and it is (Cu0.9Co0.1)6Sn5 and (Cu0.99Co0.01)6Sn5 on the solder and Cu3Sn sides, respectively, in the (Sn–3.5Ag–0.1Co)/Cu diffusion couple. Different rate-controlling processes were suggested for the (Sn–3.5Ag)/Cu, (Sn–3.5Ag–0.1Ni)/Cu and (Sn–3.5Ag–0.1Co)/Cu diffusion couples. Finally, thermodynamic models were herein adopted to explore influences of the additives on the thermodynamic interaction of the component elements and the driving force for the growth of intermetallics.

Related Topics
Physical Sciences and Engineering Materials Science Materials Science (General)
Authors
, , ,